| 1. Minimum Charge / Work Set Up / Travel (scheduled service, time and fuel)
|
$132.00 |
| 2. Install Suspension Tile Ceiling 2' x 4' T-bar grid system, non acoustic tile - Sq Ft. |
$3.39 |
| 3.
Install Suspension Tile Ceiling 2' x 2' T-bar grid system, non acoustic tile - Sq Ft |
$3.94 |
4.
Install Suspension Tile Ceiling 2' x 2' T-bar grid system, non acoustic tile,
with Reveal Edge - Sq Ft. |
$5.01 |
| 5.
Install Suspension Tile Ceiling 2' x 2' T-bar grid system, acoustic tile, A Fire Rated - Sq Ft. |
$4.39 |
| 6.
Install 2' x 2' T-Bar Grid, panels are not included - Sq Ft. |
$2.71 |
| 7.
Install 2' x 4' T-Bar Grid, panels are not included - Sq Ft. |
$2.52 |
| 8.
Install 2'x 2' Tile Panels for Acoustical Tile Ceiling, tile only - Sq Ft. |
$2.79 |
| 9.
Install 2'x 2' Tile Panels for Acoustical Tile Ceiling, tile only, fire rated - Sq Ft. |
$2.94 |
| 10.
Install White Acrylic Egg Crate panels for 2' x 4' drop ceiling. T-bar grid is not included - Ea. |
$23.00 |
11.
Install Milled Aluminum Egg Crate panels for 2' x 4' drop ceiling.
T-bar grid not included - Ea. |
$33.00 |
12.
Install White Aluminum Egg Crate panels for 2' x 4' drop ceiling.
T-bar grid not included - Ea. |
$35.91 |
| 13.
Install Anodized Aluminum Egg Crate panels
(2' x 4') ceiling. T-bar grid not included Ea. |
$59.11 |
| 14.
Install Prismatic, Light Diffusing Panel for 2' x 4' under fluorescent lighting, no T-bar - Ea. |
$15.69 |
15.
Install Victorian Pattern, Light Diffusing Panel for 2' x 4' under fluorescent lighting,
no T-bar Ea. |
$16.25 |
| 16.
Install Good Grade Adhesive Ceiling Tile Cost includes 12" x 12" tile - Sq Ft. |
$2.55 |
| 17.
Install Better Grade Adhesive Ceiling Tile Cost includes 12" x 12" tile
- Sq Ft. |
$2.69 |
| 18.
Install Premium Grade Adhesive Ceiling Tile
Cost
includes 12" x 12" tile - Sq Ft. |
$2.76 |
19.
Install Heavily Textured Adhesive Ceiling Tile
Cost includes 12" x 12" tile with heavily textured Sq Ft. |
$3.75 |
| 20.
Install 2' x 2' Embossed Panel Tin Ceiling Tiles material and installation - Sq Ft. |
$5.53 |
| 21.
Install 12" x 12" Embossed Panel Tin Ceiling Tiles material and installation - Sq Ft. |
$4.11 |
| 22.
Install 12" x 24" Embossed Panel Tin Ceiling Tiles material and installation - Sq Ft. |
$4.27 |
| 23.
Install 3" Wide Embossed Moldings for Tin Ceiling
Tiles - Ln Ft. |
$5.35 |
| 24.
Install 4" Wide Embossed Moldings for Tin Ceiling
Tiles - Ln Ft. |
$5.35 |
| 25.
Install 6" Wide Embossed Moldings for Tin Ceiling
Tiles - Ln Ft. |
$6.90 |
| 26.
Install 12" Wide Embossed Moldings for Tin
Ceiling Tiles - Ln Ft. |
$9.39 |
| 27. Demo,
non-salvage condition. pile on jobsite, labor to load, hauling, dumping fees. |
Jobsite? |
| 28. Demo,
suspension grid system and tiles, 2 x 2 or 2 x 4 - Sq Ft. |
$1.23 |
| 29. Demo,
suspension grid system only, no tiles 2 x 2 or 2 x 4 - Sq Ft. |
$ .73 |
| 30. Demo,
suspension tiles only, all types 2 x 2 or 2 x 4 - Sq Ft. |
$ .35 |
31. Demo,
Acrylic, Aluminum, Anodized Egg Crate Louver, Light Diffusing Panel only,
2 x 2, 2 x 4 - Ea. |
$ .47 |
| 32. Demo,
all Grades of Adhesive Ceiling Tile, Acoustic & Non-Acoustic - Sq Ft. |
$ .70 |
33.
Demo, Embossed Plate Tin Ceiling Tiles
12" x 12" , 12" x 24", 24" x 24", 24" x 48" - Sq Ft. |
$3.29 |
| 34.
Demo, Embossed Moldings for Tin Ceiling Tiles, 3",
4", 6", 12" Wide - Ln Ft. |
$ .94 |
|
Note: Ln
= linear foot. Sq = square foot. |
Price Information for Acoustical Ceilings
This is a Pricing Guide to estimate the approximate cost of acoustical ceilings for property improvements.
Basic materials are included in these costs but special purchases are not.
Important Note:
The prices listed below are "industry averaged" and do not represent the prices or costs of any particular company affiliated with Contractors Solutions Inc.
|
| Commercial
Ceilings supplies from Delaware County, University City, West and South Philadelphia, PA,
Main Beam, Main Runner, Main Tee:
Primary or main beams of the type
of ceiling suspension system in which the structural members are
mechanically locked together. Provide direct support for cross runners and
may support lighting fixtures and air diffusers, as well as the acoustical
tile. Supported by hanger wires attached directly to the existing structure
or installed perpendicular to carrying channels and supported by specially
designed sheet metal or wire clips attached to the carrying channels.
Typically a 12' piece located 4' on center. Also referred to as H runners
and Z bars.
Mineral Wool: A man-made wool-like material of fine inorganic fibers
made from slag, used as loose fill or formed into blanket, batt, block,
board, or slab shapes for thermal and acoustical insulation.
ML: Cross tee end detail that is a hook insertion contrasted with
the XL that is stab insertion. The ML end detail is quick and easy to
install however, it does not meet most seismic requirements greater than
Zone 2.
Noise Reduction Coefficient (NRC): Average sound absorption
coefficient measured at four frequencies: 250, 500, 1,000 and 2,000 Hz
expressed to the nearest integral multiple of 0.05. Rates the ability of a
ceiling or wall panel or other construction to absorb sound. NRC is the
fraction of sound energy, averaged over all angles of direction and from low
to high sound frequencies, that is absorbed and not reflected.
Override: Offset on the end of some cross tees that rests on top of the
supporting members flange. Increases stability and moves cut edge of tee out
of the visible plane of the ceiling.
Plenum:In suspended ceiling construction, the space between the
suspended ceiling and the main structure above.Scoring: Process of
cutting grooves into the face of acoustical panels creating a different
geometric visual with decorative and some acoustical benefit. Scoring often
mimics the suspension grid, camouflaging it and making 2' x 2' and 2' x 4'
panels look like 12" x 12" tile.
Scrubbable: For applications where cleanliness is a priority,
acoustical units may require cleaning beyond normal maintenance procedures.
Stab End Detail: Designed to be inserted with a forward motion.
Stitching: Dimples impressed in grid members to knit the webs
together.Suspension: A metal grid suspended from hanger rods or
wires, consisting of main beams and cross tees, clips, splines and other
hardware which supports lay-in acoustical panels or tiles. The completed
ceiling forms a barrier to sound, heat, and fire. It also absorbs in-room
sound and hides ductwork and wiring in the plenum.
Tegular: A functional edge detail. Tegular suspended ceiling panels
have a rabbeted/reveal edge design that allows them to extend below the
supporting grid, making the grid less conspicuous.
Tile: Acoustical ceiling board, usually 12" x 12", which is
stapled, cemented, or suspended by a concealed grid system. Edges are often
kerfed and cut back.
UBC 25-2: Uniform Building Code (seismic standard).UL Label:
An identification affixed to a building material or component, with the
authorization of Underwriters Laboratories, Inc. |
|
Let
us estimate the job >>>
